Filter
Top Products
5
3. INSTALLATION
Unpack the box and check the package contents for completeness.
Package Content List
n Mattress unit x 1 (may not be included if only pump unit is purchased)
n Pump Unit x 1
n User Manual x 1
Inspect equipment for damage which may have occurred during shipment. If there is damage, please
contact your dealer immediately.
3.1 PUMP & MATTRESS INSTALLATION
1. Place the mattress or pad on top of a bed frame.
Orient the mattress so that the foot-markers on the
mattress are situated towards the end of the bed
(where pump will be located).
2. Place the pump hangers over the bed railing at the
foot of the bed. Support the pump from the bottom
and turn the hangers outward (or inward) to secure
the pump against the railing.
If no bed railing is available, place the pump on a flat,
sturdy surface or on the floor, beneath the bed.
3. Connect the Quick Connector on the air hose (from
air mattress) to the pump unit Quick Connector Slot.
When you
hear a "click", the
connection will be
secured.
NOTE: Check and ensure the air hoses are
not kinked or tucked under the
mattress.
10
8. TECHNICAL DESCRIPTION
Specifications:
Item Specification
Power Supply (Note: See
rating label on the product)
AC 100-120V 60 Hz, 0.16 A 14W (For 120V System)
Fuse Rating T1A, 250V
Cycle time Fixed, 8 min @ 60Hz,
Dimension (L x W x H) 29 x 18.5 x 12.6 (cm) or 11.4" x 7.3" x 5.0"
Weight 2.2 Kg or 5 lb
Environment
Temperature
Operation:10° C to 40° C (50° F to 104° F)
Storage: -15° C to 50° C (5° F to 122° F)
Shipping: -15° C to 70° C (5° F to 158° F)
Humidity
Operation: 10% to 90% non-condensing
Storage: 10% to 90% non-condensing
Shipping:10 % to 90% non-condensing
Classification
Class II with functional earth(NOTE:5*), Type BF, IPX0
Applied Part: Air Mattress
Not suitable for use in the presence of a flammable
anesthetic mixture (No AP or APG protection)
Mattress Specification
Model 8” Replacement
Dimension (L x W x H)
200 x 90 x 20.3 (cm)
or 78.7” x 35.4” x 8”
Weight 7.5 kg 16.5 lb
egnaR erusserP
NOTE: 1. Consult the distributor or EU representative for further technical documents.
2. These specifications are also applicable for other regions operating with the
same power supply.
3. The manufacturer reserves the right to modify the specifications without notice.
4. The earthing terminal is served as functional earth, not protective earth.
Adjustable Weight Settings