Filter
Top Products
Aquatic Fitness System
2003 Owner’s Manual
Jets 2 and Jets 3 Buttons
JETS 2 and JETS 3 Buttons: Press the appropriate button once to turn on Pumps 2
or 3. The pumps work independently, thus allowing you to control the total volume of
water pumped to the Swim Jets. Pressing either button a second press will turn that
pump(s) off.
A built-in timer will shut the pump(s) off after 20 minutes of operation unless you
manually shut them off earlier. The Jets 2 or Jets 3 Indicator light will be lit next to the
Jets 2 or Jets 3 Button whenever that Jet is running.
Pumps 2 and 3 provide high volume water flow to the Swim Jets.
If you are operating with a 60-amp service for heat and pumps, the heater will turn off if any
of the pumps are operated at high speed. If you are running a separate 50-amp service for
heat and a separate 50-amp service for the pumps, you can continue to heat your water while
operating the pumps at high speed.
Light Button
Light Button: Press this button to turn on the Aquatic Fitness System light; a
second press will turn the light off. The Light Indicator next to the Light Button will be
lit while the light is on. The light, when the Light button is manually pressed, has an
automatic one-hour time out. Some Aquatic Fitness System models have two
lights controlled by this switch.
LED Display Window
LED Display Window: This window displays the actual water temperature.
However when you are setting the “target temperature” for your water, this window
will display the SET temperature. After a brief pause, about 5 seconds, the window
will return the display to the actual water temperature.
12