Filter
Top Products
8
■ Make sure lantern is cool.
■ Move lantern away from ame (including pilot lights) and other
ignition sources.
■ Remove propane cylinder from lantern.
■ Replace protective cap on propane cylinder.
■ Lantern can be placed in base for secure storage.
To Store
• EXPLOSION - FIRE HAZARD
•
Never store propane near high heat, open flames, pilot lights, direct sunlight,
other ignition sources or where temperatures exceed 120 °F (49 °C).
• The cylinder must be disconnected when the lantern is in storage.
DANGER
To Light continued
To Turn Off
NOTE: If lantern does not light,
repeat above step. If the lan-
tern does not light after several
attempts, check for a spark while
clicking the valve. If no spark is
present, check the electrode gap.
The gap should be about 1/8"
(3 mm). Bend flat electrode to set
gap. If the lantern is wet due to rain,
high humidity, etc., the valve may
not spark. Use lighting procedure
for match light version lanterns.
1/8"
(3 mm)
■ Brightness may be adjusted
with fuel valve.
■ Turn fuel valve off.
■ The lantern may be carried by
the handle.