Filter
Top Products
To Light continued
7
■ Screw propane cylinder into
lantern. Take care not to cross-
thread. Hand tighten only.
WARNING
• BURN HAZARD
•
Never leave lantern unattended when hot or in use.
• Keep out of reach of children.
■ Set legs of base in outer position.
■ Set lantern into base.
Match Light Lantern
■ Push lighted match through
lighting hole, hold near mantle
and open fuel valve fully.
INSTASTART™
Electronic Ignition Lantern
■ Turn fuel valve on. The valve
will click and a spark will jump
between electrodes and ignite
the mantles.
CAUTION
• SERVICE SAFETY
•
Keep all connections and fit-
tings clean. Inspect propane
cylinder and lantern propane
connections for damage
before attaching.
•
During set up, check all con-
nections and fittings for leaks
using soapy water. Bubbles indi-
cate a leak. Never use a flame.