Filter
Top Products
20
Troubleshooting
is displayed.
The battery is low. Replace with a new •
battery (CR2032). (See page 18)
Nothing is displayed at all.
Nothing is displayed when the pedometer •
is in power-saving mode. Press the [SET]
button or any other button.
Check that a battery is inserted and that it •
is correctly oriented. (See page 18)
The battery may be exhausted. Replace •
with a new battery. (See page 18)
If you are using the pedometer for the fi rst •
time, press and hold the [SET] button (for
at least three seconds). (See page 6)
Press the reset button on the back of the •
pedometer. (See page 19)
The reading seems inaccurate.
Check whether you are using the pedom-•
eter correctly. (See page 10)
Steps are not counted when I shake the
pedometer.
To prevent measuring errors, ‘walking’ is •
judged to be performed after at least six
seconds of walking and the relevant num-
ber of steps up to that point are added
on. Shaking the pedometer once or twice
doesn’t have an impact on the number of
steps counted.