Filter
Top Products
SETTINGS & TOOLS
G’zOne TYPE-S
103
G’zOne TYPE-S
102
NOTE
When the phone is closed and in idle mode, Stop Watch can
be run by pressing Voice Command key for 2 seconds and
pressing it shortly again. Press the Volume Up key to start
the timer or pause it. Press the Volume Down key to split the
timer. Press the Volume Up key for 2 seconds to reset the
timer. To return to idle mode, press the Voice Command key.
3. Bluetooth Menu
The G'zOne TYPE-S is compatible with devices that
support the Bluetooth
®
Headset (HSP), Hands-Free
(HFP), Serial Port (SPP), and Dial-Up Networking (DUN)
Profiles. * You may create and store 20 pairings within
the G'zOne TYPE-S and connect to one device at a time.
The approximate communication range for Bluetooth
®
wireless technology is up to 25 feet.
NOTE
Read the user guide of each Bluetooth
®
accessory that you
are trying to pair with your phone because the instructions
may be different.
NOTE
Your phone is based on the Bluetooth
®
specification, but it is
not guaranteed to work with all devices enabled with
Bluetooth
®
wireless technology. Phone does not support
Bluetooth
®
OBEX Profiles. * For vehicle/accessory (sold
separately) compatibility go to www.verizonwireless.com/
bluetoothchart.
3.1
Add New Device
Pairing is the process that allows the handset to locate,
establish, and register 1-to-1 connection with the target
device.
Power
Allows you to turn the phone's Bluetooth
®
power On/Off.
1. Press Center Select Key for [MENU],Navigation
Key right 2 times, press
Bluetooth Menu.
2. Press Left Soft Key [On].
NOTE
By default, your phone's Bluetooth
®
functionality is turned off.
For pairing new Bluetooth
®
device
1. Follow the Bluetooth
®
accessory instructions to set the
device to pairing mode.
2. Press Center Select Key for [MENU],Navigation
Key right 2 times Bluetooth Menu. Press
Center Select Key for [OK] or to select Add
New Device.