Filter
Top Products
Operation Guide 2914
8
10.
When all of the settings are the way you want, press the
AA
AA
A button.
• This exits the setting screen.
• The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
6. While the 12/24-hour
timekeeping setting is
flashing, press the
DD
DD
D
button to toggle between
12-hour (“12H”) and
24-hour (“24H”)
timekeeping.
7. While the seconds are
selected, press the
DD
DD
D
button to reset them to 00
in accordance with the
time signal on the radio,
TV, etc.
• Pressing the D button while
the seconds count is in the
range of 30 to 59 resets it to
00 and also adds 1 to the
minutes. Pressing the D
button in the range of 00 to 29
resets the seconds count
without changing the minutes.
• Pressing the B button while
the seconds count is flashing
changes the display
illumination duration. See “To
specify the illumination
duration” for more information.
8. While the hour, minutes,
year, month, or day setting
is flashing, use the
DD
DD
D (+)
and
BB
BB
B (–) buttons to
change the setting.
• Holding down either button
changes the setting at high
speed.
• When setting the hour, make
sure you specify AM (no
indicator) or PM (P) correctly,
or that you specify the correct
24-hour time.
• You can set a year in the range of 2000 to 2099. The day of
the week is set automatically in accordance with the date you
set.
• The watch automatically makes adjustments for leap years
and month lengths.
9. While the Power Saving
setting is flashing, press
the
DD
DD
D button to toggle it
on (ON) or off (OF).
• If you turn on Power Saving,
the Power Saving indicator
will be on the display when
you exit the setting screen.
Use the C button to select each of the settings and the D and
B buttons to change them.
Resets to 00.
Indicates 12-hour or
24-hour timekeepin
g
.
(Forward)
(Back)
Hour Year
Minutes