Filter
Top Products
Operation Guide 3403
E-29
●
To change an alarm time setting, hold down
3
A
for about two seconds until
the hour digits of the current alarm time start to fl ash.
[SET Hold] will appear on the display. After that, [SET
Hold] will disappear and the hour digits will fl ash.
●
Each press of
4
C
causes the fl ashing to move between the hour and the
minutes digits.
The fl ashing digits are the ones that are selected.
●
Use
5
B
and
D
to change the fl ashing setting, and set the hour and minutes
you want.
Holding down either button scrolls the setting at high speed.
x
If you are using 12-hour timekeeping, the PM indicator will appear for times x
between noon and 11:59 p.m.
E-28
Hourly time signal
: Hourly time signal does not sound.
: Hourly time signal sounds every hour on the hour.
The Alarm indicator is displayed while an alarm is turned on, while the Hourly
time signal indicator is displayed while the hourly time signal is turned on.
When the snooze alarm is turned on, both the alarm indicator and the snooze
indicator are displayed.
Hourly time signal on
Hourly time signal indicator
Alarm on
Alarm indicatorSnooze indicator
E-27
●
Use
2
B
to select the alarm type or to toggle the hourly time signal between
on and off.
Alarm 1 to 4
: Alarm does not sound.
:
Alarm sounds only once at the preset time and does not sound again after
that.
: Alarm sounds at the preset time each day.
Snooze alarm
: Alarm does not sound.
:
Alarm sounds at the preset time each day, and up to seven times at fi ve-
minute intervals thereafter.
E-26
To change an alarm setting
●
In the Alarm Mode, use
1
D
to select the alarm whose setting you want to
change.
Alarm 1
( )
D D
Alarm 2
( )
Alarm 3
( )
Alarm 4
( )
Hourly Time
Signal ( )
Snooze alarm
( )
DD
D D
E-25
Alarm setting screen
Alarm number
Current time
Hourly time signal setting screen
Current time
Note
If you do not perform any operation for about two or three minutes while in the Alarm
Mode, the watch will automatically return to the Timekeeping Mode.
E-24
Alarms and Hourly Time Signal
You can set up to fi ve different alarms. When any one of the alarm times is reached
the watch will sound an alarm tone and fl ash its display illumination, or it will vibrate
for about 10 seconds. The hourly time signal causes the watch to sound a tone and
fl ash its display illumination or to vibrate every hour on the hour.
See “To change the alarm/timer alert method” (page E-44).
To enter the Alarm Mode
●
In the Timekeeping Mode, press
C
twice to enter the Alarm Mode.
See “Using Modes” (page E-12).
[ALARM] will appear on the display for about one second. After that, an alarm
setting screen (Alarm 1 through Alarm 5, or hourly time signal) will appear.
E-23
Note
Summer time, or Daylight Saving Time (DST) as it is known in some countries,
x
calls for setting clocks ahead one hour from standard time during the summer
season. Note that the period during which and the areas where summer time is
applied depend on each country. Some countries or geographic areas may not use
summer time.
The DST indicator will be on the display and timekeeping will be advanced by one
x
hour when summer time is turned on.
The summer time setting cannot be changed for the UTC World Time zone. x
The summer time setting is applied to the currently selected time zone only. A x
setting confi gured for one time zone does not affect any other time zone.
E-22
To confi gure the Summer Time (DST) setting
●
In the World Time Mode, hold down
A
for about two seconds.
[DST Hold] will appear on the display. After that,
x
[DST Hold] will disappear and the summer time
setting will toggle to either on or off.
x DST on the display indicates that summer time is
turned on.
DST indicator
E-21
Note
Scrolling of the World Time city name will stop after about two minutes. To re-
start scrolling, press A.
●
Use
2
B
and
D
to scroll through the World Time Mode city names.
See “City Name List” (back of this manual).
Scrolling to a city name displays the current time in that city. x
Holding down either button scrolls at high speed. x
To display the UTC city name (UTC offset 0), press x B and D at the same
time.
●
To return to the Timekeeping Mode, press
3
C
four times.
E-20
World Time
World Time lets you display the current time in any one of 100 cities (35 time zones)
around the world.
To view the times in other time zones
●
In the Timekeeping Mode, press
1
C
to enter the World Time Mode.
See “Using Modes” (page E-12).
[WT100] will appear on the display for about
1
one second, and then the name of the
currently selected World Time city will scroll
across the display.
Current date in
World Time city
Current time in
World Time city
City name