Filter
Top Products
E-50
Note
• Sunrise and sunset times are calculated in accordance with the current date based
on the currently specifi ed Home City, latitude, and longitude.
• Before trying to use the Sunrise/Sunset Mode, you need to confi gure settings for the
Home City, longitude, and latitude for the location whose sunrise and sunset times
you want to view.
To toggle between sunrise time and sunset time
Press
A
.
E-51
To view the sunrise/sunset time for a particular date
While the sunrise time or sunset time is displayed in the
Sunrise/Sunset Mode, use
B
(+) and
D
(–) to scroll
through the dates.
• The sunrise time or sunset time for the currently
selected date will appear on the digital display.
• You can select any date between January 1, 2000 and
December 31, 2099.
Note
•
If you think that the sunrise and/or sunset times
are not correct for some reason, check the watch’s
Home City, longitude and latitude settings.
• The sunrise and sunset times displayed by this
watch are times at sea level. Sunrise and sunset
times are different at altitudes other than sea level.
Sunrise time or
sunset time
Sunrise time or
sunset time
E-52
Using Moon Data
The Moon Age Mode displays a value that indicates the Moon age at noon on the
current date.
To look up the Moon age on a specifi c date
1. Use
C
to select the Moon Age Mode (
MOON AGE
) as
shown on page E-12.
•
MOON AGE will appear on the digital display for
about one second. After that the current year, month,
and day will appear for about one second.
•
Next, CALC will appear on the digital display
indicating that Moon age calculation is in progress.
After the calculation is complete, the Moon age value
for the current date will appear.
Moon ageMoon age
E-53
2. While a Moon age value is displayed you can use the
D
(+) and
B
(–) buttons to
scroll from day to day.
•
Scrolling to another day will cause CALC to appear on the digital display for one
second indicating that Moon age calculation is in progress. The Moon age for
the selected data will appear when calculation is complete.
•
Hold down
C
for two seconds to return to the Timekeeping Mode.
Note
• Moon age is calculated to an accuracy of ±1 day.
• If the Moon data is not correct, check your Timekeeping Mode settings and correct
them if necessary.
E-54
Using the Alarm
You can set fi ve independent daily alarms. When a daily
alarm is turned on, an alarm tone will sound for about 10
seconds each day when the time in the Timekeeping
Mode reaches the preset alarm time. This is true even if
the watch is not in the Timekeeping Mode.
You can also turn on an Hourly Time Signal, which will
cause the watch to beep twice every hour on the hour.
To enter the Alarm Mode
Use
C
to select the Alarm Mode (
ALARM
) as shown on
page E-12.
•
ALARM
will appear on the digital display for about one
second. After that, the digital display will show the
current alarm time and alarm number (
–1
to
–5
), or the
hourly time signal setting. In the case of an alarm, the
digital display alternates at one-second intervals
between the alarm number and the on/off setting screen.
Alarm time
(Hour : Minutes) or SIG
Alternates
(1 second)
Alarm
number
Alarm time
(Hour : Minutes) or SIG
Alternates
(1 second)
Alarm
number
E-55
• The alarm number indicates an alarm screen.
SIG
is shown when the Hourly Time
Signal screen is on the digital display.
• When you enter the Alarm Mode, the data you were viewing when you last exited
the mode appears fi rst.
To set an alarm time
1. In the Alarm Mode, use
D
and
B
to scroll through the
alarm screens until the one whose time you want to set
is displayed.
−1 −2 −3
SIG −5 −4
2. Hold down
A
until the alarm time starts to fl ash. This is
the setting screen.
E-56
3. Press
C
to move the fl ashing between the hour and minute settings.
4. While a setting is fl ashing, use
D
(+) and
B
(–) to change it.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. or p.m.
5. Press
A
to exit the setting screen.
To test the alarm
In the Alarm Mode, hold down
D
to sound the alarm.
E-57
To turn an alarm and the Hourly Time Signal on and off
1. In the Alarm Mode, use
D
and
B
to select an alarm or
the Hourly Time Signal.
2. When the alarm or the Hourly Time Signal you want is
selected, press
A
to toggle it between on and off.
• The alarm on indicator (when any alarm is on) and the
Hourly Time Signal on indicator (when the Hourly
Time Signal is on) are shown on the digital display
in all modes.
To stop the alarm
Press any button.
Alarm on indicator
Hourly time signal
on indicator
Alarm on indicator
Hourly time signal
on indicator
E-58
Using the Stopwatch
The stopwatch measures elapsed time and split times.
To enter the Stopwatch Mode
Use
C
to select the Stopwatch Mode (
STW
) as shown on
page E-12.
•
STW
will appear on the digital display for about one
second. Next, the digital display will change to show
the stopwatch time.
To perform an elapsed time operation
D
D D D B
Start Stop (Restart) (Stop) Reset
To pause at a split time
D
B B D B
Start Split Split release Stop Reset
Hours
Minutes
1/100 second
Seconds
Hours
Minutes
1/100 second
Seconds
E-59
• Digital display alternates between
SPL
and the 1/100-second value at one-second
intervals.
Note
• The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.99
seconds.
• Once started, stopwatch timing continues until you press
B
to reset it, even if you
exit the Stopwatch Mode to another mode and even if timing reaches the stopwatch
limit defi ned above.
• Exiting the Stopwatch Mode while a split time is frozen on the digital display clears
the split time and returns to elapsed time measurement.
Operation Guide 5269