Filter
Top Products
MO1208-EA
© 2012 CASIO COMPUTER CO., LTD.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
Warning!
•
The measurement functions built into this watch are not intended for taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonable representations only.
• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of
this product or its malfunction.
E-2
• To ensure correct direction readings by this watch, be sure to perform
bidirectional calibration before using it. The watch may produce incorrect
direction readings if you do not perform bidirectional calibration. For more
information, see “To perform bidirectional calibration” (page E-36).
• Keep the watch away from audio speakers, magnetic necklace, cell phone,
and other devices that generate strong magnetism. Exposure to strong
magnetism can magnetize the watch and cause incorrect direction readings. If
incorrect readings continue even after you perform bidirectional calibration, it
could mean that your watch has been magnetized. If this happens, contact
your original retailer or an authorized CASIO Service Center.
E-3
About This Manual
• Depending on the model of your watch, digital display
text appears either as dark fi gures on a light
background, or light fi gures on a dark background. All
sample displays in this manual are shown using dark
fi gures on a light background.
• Button operations are indicated using the letters shown
in the illustration.
• Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E-4
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “Confi guring Home City Settings” (page E-17) to confi gure
your Home City and daylight saving time settings.
Important!
Proper World Time Mode, Sunrise/Sunset Mode, and Moon Age Mode data depend
on correct Home City, time, and date settings in the Timekeeping Mode. Make sure
you confi gure these settings correctly.
2. Confi gure latitude and longitude settings for your current location.
See “To select a Home City by confi guring latitude and longitude settings” (page
E-20).
E-5
3. Set the current time.
See “Confi guring Current Time and Date Settings” (page E-22).
The watch is now ready for use.
E-6
Contents
E-3 About This Manual
E-4 Things to check before using the watch
E-11 Mode Reference Guide
E-16 Timekeeping
E-17 Confi guring Home City Settings
E-17 To confi gure Home City settings
E-19 To change the Daylight Saving Time (summer time) setting
E-20 Confi guring Latitude and Longitude Settings for Your Current Location
E-20 To select a Home City by confi guring latitude and longitude settings
E-22 Confi guring Current Time and Date Settings
E-22 To change the current time and date settings
E-7
E-26 Hand Home Position Adjustment
E-26 To adjust home positions
E-29 Taking Direction Readings
E-30 To take a direction reading
E-36 To perform bidirectional calibration
E-38 To perform magnetic declination correction
E-43 Thermometer
E-43 To enter and exit the Thermometer Mode
E-45 To correct the temperature value
E-47 Specifying Temperature Unit
E-47 To specify the temperature unit
E-49 Looking up Sunrise and Sunset Times
E-49 To look up the sunrise and sunset times on a specifi c date
E-50 To toggle between sunrise time and sunset time
E-51 To view the sunrise/sunset time for a particular date
E-8
E-52 Using Moon Data
E-52 To look up the Moon age on a specifi c date
E-54 Using the Alarm
E-54 To enter the Alarm Mode
E-55 To set an alarm time
E-56 To test the alarm
E-57 To turn an alarm and the Hourly Time Signal on and off
E-57 To stop the alarm
E-58 Using the Stopwatch
E-58 To enter the Stopwatch Mode
E-58 To perform an elapsed time operation
E-58 To pause at a split time
E-9
E-60 Using the Countdown Timer
E-60 To enter the Countdown Timer Mode
E-60 To specify the countdown start time
E-61 To perform a countdown timer operation
E-62 To stop the alarm
E-63 Checking the Current Time in a Different Time Zone
E-63 To enter the World Time Mode
E-64 To view the time in another time zone
E-64 To specify standard time or daylight saving time (DST) for a city
E-65 Illumination
E-65 To turn on illumination
E-66 To change the illumination duration
E-68 Button Operation Tone
E-68 To turn the button operation tone on and off
Operation Guide 5269