Casio 5192 Watch User Manual


  Open as PDF
of 6
 
Operation Guide 5192
E-20
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that corresponds
x
to Newfoundland.
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the
x
Second Hand moves to the city
code of the currently selected Home City.
This is the city code setting mode.
x
The watch will exit the setting mode automatically if x
you do not perform any operation for about two or
three minutes.
@
E-21
For details about city codes, see the “City Code Table” at the back of this x
manual.
To change the Home City setting, press 2. D to move the
x
Second Hand clockwise.
Keep pressing
x D until the
x
Second Hand is pointing
at the city code you want to select as your Home City.
Each time you change the city code setting, the
x
z
Hour Hand,
c
Minute Hand,
b
24-hour Hand and
m
Day move to the current time and date for that city
code. Do not perform the next operation until these
hands stop moving.
B +
*> 5@
E-22
Press 3. B to toggle the time for the currently selected city code between STD
(standard time)/DST (daylight saving time).
While you are selecting the Home City code, the
x
v
Left Dial Hand will indicate
whether the currently selected city code is confi gured for standard time (STD) or
daylight saving/summer time (DST).
Note that you cannot switch between
x STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After all the settings are the way you want, press 4. A to return to the Timekeeping
Mode.
E-23
To toggle the Home City time between standard time and daylight saving time
Perform the step 3 under “To confi gure Home City settings” on page E-20.1.
Each time you select a city code, the
x
z
Hour Hand,
c
Minute Hand, and
b
24-hour Hand move to the current time for that city code. Do not perform the
next operation until these hands stop moving.
While you are selecting the Home City code, the
x
v
Left Dial Hand will indicate
whether the currently selected city code is confi gured for standard time (STD) or
daylight saving/summer time (DST).
Press 2. B to toggle the time for the city code of the currently selected Home City
between STD (standard time)/DST (daylight saving time).
Note that you cannot switch between
x STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After the setting is the way you want, press 3. A to return to the Timekeeping Mode.
E-24
Note
After you specify a city code, the watch will use UTC* offsets to calculate the World
x
Time based on the current time in your Home City.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The *
reference point for UTC is Greenwich, England.
E-25
Confi guring Current Time and Date Settings
You can confi gure current time and date settings in the Timekeeping Mode.
To change the current time setting
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the
x
Second Hand moves to the city
code of the currently selected Home City.
The
x
v
Left Dial Hand will indicate whether the
currently selected city code is confi gured for standard
time (STD) or daylight saving/summer time (DST).
@>
E-26
Change the Home City and daylight saving time (DST) settings, if you want.2.
For details about these settings, see steps 2 and 3 under “To confi gure Home x
City settings” (page E-20).
In the following steps, each press of x C cycles between settings as shown
below.
Home city/DST Hour/Minute
Year
(tens digit)
Day Month
Year
(ones digit)
E-27
Press 3. C.
The x
x
Second Hand will move to 12 o’clock. This is
the time setting mode.
Use 4. D (+) and B (–) to change the time (hour and
minute) setting.
Each press of either button will move the hands
x
(
z
Hour Hand and
c
Minute Hand) one minute.
Holding down x D or B will start high-speed
z
Hour
Hand and
c
Minute Hand movement in the applicable
direction. To stop high-speed hand movement, press
any button.
The
x
b
24-hour Hand and
z
Hour Hand move in sync
with each other.
When setting the time, make sure that the
x
b
24-hour
Hand indicates the proper a.m./p.m. hour.
B +
*
@
E-28
If you want to change the date setting at this time, press x C and perform the
procedure starting from step 3 under “To change the current date setting” (page
E-29).
After the time setting is the way you want, press 5. A to return to regular
timekeeping.
This will cause the
x
x
Second Hand to move automatically to 12 o’clock and
resume movement from there.
E-29
To change the current date setting
@
00
50
10
40
20
3090
60
80
70
Setting the year (tens digit)
In the Timekeeping Mode, keep 1. A depressed
(for about fi ve seconds) as the
x
Second Hand
moves to the city code of the currently selected
Home City.
Press 2. C twice.
The
x
x
Second Hand will move to the tens digit
of the current year setting. This is the year
setting mode.
The year can be set in the range of 2000 to
x
2099.
 previous next