Casio 4312/4313 Watch User Manual


  Open as PDF
of 7
 
Operation Guide 4312/4313
4
■ To search for a city code
In the World Time Mode, press the
DD
DD
D button to scroll
through the city codes.
• Holding down any button advances the corresponding setting at
high speed.
City Code
World Time
(Scroll)
Use the
CC
CC
C button to enter the World Time Mode as shown
under “Modes and Display Screens”.
World time lets you display the current time in any one of 48 cities
(29 time zones) around the world.
• When you enter the World Time Mode, the screen for the city that
was displayed when you last exited the mode appears first.
• The seconds count in the World Time Mode is linked with the
Timekeeping Mode seconds count.
• The same 12-hour/24-hour format you select for the Timekeeping
Mode time is also applied in the World Time Mode.
Important!
If the World Time Mode time is incorrect, check the setting of the
current time and your Home Time setting in the Timekeeping
Mode, and make any necessary corrections.
• See “To configure Home City settings” for details on how to
set the current time.
Using World Time
World Time City Code List
City
Code
PPG
HNL
ANC
YVR
LAX
YEA
DEN
MEX
YWG
CHI
MIA
YTO
NYC
CCS
YHZ
YYT
RIO
RAI
LIS
LON
BCN
MAD
PAR
MIL
Pago Pago
Honolulu
Anchorage
Vancouver
Los Angeles
Edmonton
Denver
Mexico City
Winnipeg
Chicago
Miami
Toronto
New York
Caracas
Halifax
St. John’s
Rio de Janeiro
Praia
Lisbon
London
Barcelona
Madrid
Paris
Milan
–11.0
–10.0
–9.0
–8.0
–8.0
–7.0
–7.0
–6.0
–6.0
–6.0
–5.0
–5.0
–5.0
–4.0
–4.0
–3.5
–3.0
–1.0
+0.0
+0.0
+1.0
+1.0
+1.0
+1.0
ROM
BER
STO
ATH
CAI
JRS
MOW
JED
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
HKG
SEL
TYO
ADL
GUM
SYD
NOU
WLG
Rome
Berlin
Stockholm
Athens
Cairo
Jerusalem
Moscow
Jeddah
Teheran
Dubai
Kabul
Karachi
Delhi
Dhaka
Yangon
Bangkok
Hong Kong
Seoul
Tokyo
Adelaide
Guam
Sydney
Noumea
Wellington
+1.0
+1.0
+1.0
+2.0
+2.0
+2.0
+3.0
+3.0
+3.5
+4.0
+4.5
+5.0
+5.5
+6.0
+6.5
+7.0
+8.0
+9.0
+9.0
+9.5
+10.0
+10.0
+11.0
+12.0
GMT
Differential
City Name
City
Code
GMT
Differential
City Name
• The contents of the above table are current as of December 2004.
• Time differentials in the above table are in accordance with
Universal Time Coordinated (UTC).
Using Summer Time (DST)
Summer time, or Daylight Saving Time (DST) as is it is called in
some countries, calls for setting clocks ahead one hour during the
summer season.
Note that the use of summer time depends on the country and
even the local area.
■ To turn summer time on or off
Getting Ready:
In the World Time Mode, use the
DD
DD
D button to display the screen
for the city code whose summer time setting you want to
change.
Hold down the
AA
AA
A button for
two seconds to toggle the
summer time setting on (DST
indicator displayed) and off.
• The “DST” indicator appears on
the display and timekeeping is
advanced by one hour when
summer time is turned on.
• You can turn summer time on
or off independently for each
World Time Mode city, except
for the city that is selected as
your Home City.
DST indicator
■ To perform elapsed time measurement
Stop ResetStart
Cumulative Time Measurement
Pressing the D button to restart the stopwatch without resetting it
to all zeros resumes elapsed time measurement from where it was
last stopped.
■ To perform split time measurement
Split Release Split ResetStopStart
Split Indicator
■ To time 1st and 2nd place finishers
Start 1st Finisher
(Displays time
of 1st finisher.)
2nd
Finisher
Displays time
of 2nd finisher.
Reset
Use the
CC
CC
C button to enter the Stopwatch Mode as shown
under “Modes and Display Screens”.
The stopwatch measures elapsed time in units of 1/100 second up
to 59 minutes, 59.99 seconds (60 minutes). When the maximum
limit is reached, the elapsed time returns to zero automatically and
timing continues from there.
■ To use the stopwatch
In the Stopwatch Mode, press the
DD
DD
D button to start and
stop the stopwatch.
(Split/Reset)
(Start/Stop)
Minutes/Seconds 1/100 second
• Pressing A while an elapsed time operation is being
performed freezes the current time on the display and
continues timing of the next split internally. This condition is
indicated by the “SPL” (split) indicator on the display.
• Changing to another mode while a split time is displayed
cancels the split time operation.
• Pressing the A button while timing is stopped resets the
stopwatch.
Using the Stopwatch
 previous next