Filter
Top Products
USER’S GUIDE 2367/2739
3
Day Counter
The Day Counter lets you count the number of days from the Timekeeping Mode’s
current date to a specific target date.
• There are five Day Counter records, each of which can be set with its own text and
target date (year, month, day).
• All of the operations in this section are performed in the Day Counter Mode, which
you enter by pressing C.
To recall Day Counter records
Enter the Day Counter Mode, and the Target Date/Text screen appears.
• The Target Date/Text screen alternates between the target month and day, and the
target year.
▲
▲
Target Date/Text Day Counter
Press A.
Target Month – Day
Target year
Text
Day counter
Minus sign
Text Meaning
ANIV. Anniversary
EVENT Event
BIRTHDAY Birthday
DC4 No setting
DC5 No setting
• Your watch comes preset with the Day Counter text settings shown below. You can
use these as they are or change them to something else, if you want.
• If there is no text assigned to a target date, the applicable day counter number
appears in place of the text.
• A minus sign (
x) in the upper left corner of the display indicates that the target date
comes before the current date. No sign indicates the target date is after the current
date.
Day Counter Number
DC1
DC2
DC3
DC4
DC5
• Press D to cycle through the Day Counter records as shown below.
DC1 DC3 DC4 DC5DC2
To set a Day Counter record
1.In the Day Counter Mode, use D to scroll through the
Day Counter records until the one you want to set is on
the display.
2.Hold down A until the flashing cursor appears on the
display, which indicates the setting screen.
• Pressing B and D at the same time causes the
message “CLEAR” to appear and clears the text (if
there is any already input), and sets the current
Timekeeping Mode date as the target date.
l
l
l
l
l
l
l
l
l
l
Target Month – Day
Cursor
• Use the above procedure to edit Day Counter records, too.
• The display can show only three characters at a time, so longer text scrolls
continuously from right to left.
3. Press C to move the flashing in the sequence shown below to select other
settings.
Month
Year
Day
Text
• There are eight spaces in the text, so you have to press C eight times to move to
the Year setting.
• When the Year setting is selected, the cursor changes for a four-digit target year.
4. When the setting you want to change is selected, use B and D to change it.
• Selecting the text causes the text input cursor to appear.
• When inputting text, use B and D to cycle through characters at the current
cursor location, and C to move the cursor to the right. See “Inputting Text”.
• While the year, month, or day setting is flashing, use D (+) and B (–) to change
the setting.
• You can set a target date in the range of January 1, 1940 to December 31, 2039.
5. Press A to exit the setting screen.
Note
Telememo
Telememo lets you store up to 20 records, each containing name and telephone
number data. Records are automatically sorted based on the characters of the name.
You can recall records by scrolling through them on the display.
▲
▲
Memory Number/Name Telephone Number
Press A.
Remaining memory
Memory number
Name
Telephone number
• Your watch comes preset with three Telememo records with the names “FAMILY”,
“HOME”, and “OFFICE” without any phone numbers. You can change or delete these
records if you want.
• See “Character List” for details on how the watch sorts records.
• All of the operations in this section are performed in the Telememo Mode, which you
enter by pressing C.
To create a new Telememo record
1.In the Telememo Mode, press D until a record showing
“– – –” (indicating the new record input screen)
appears.
• If the message “FULL” appears on the display, it
means that memory is full. To store another record,
you will first have to delete some of the records stored
in memory.
2. Hold down A until the flashing cursor (
_) appears on the display, which indicates
the setting screen.
3. Input a name.
• When inputting the name, use B and D to cycle through characters at the
current cursor location, and C to move the cursor to the right. See “Inputting
Text”.
• You can input up to eight characters for the name.
4.After you input the name, press C as many times as
necessary to display the number input screen.
• You can input up to eight characters for the name.
When the cursor is located at the eighth space of the
name, moving the cursor to the right causes it to jump
to the first digit of the number. When the cursor is at
the 12th digit of the number, moving it to the right (by
pressing C) causes it to jump to the first character in
the name.
5. Input a telephone number.
• Use B and D to change the character (hyphen, number, or space) at the cursor
position. The character changes in the following sequence.
l
l
l
l
l
l
l
l
l
6. When the character you want is at the cursor position, press C to move the cursor
to the right.
7. Repeat steps 5 and 6 until you complete number input.
• You can input up to 12 digits for the number.
• The number initially contains all hyphens. You can leave the hyphens or replace
them with numbers or spaces.
8. Press A to store your data and return to the Telememo record screen (without the
cursor).
• When you press A, the message “SORT” appears on the display for a few
seconds. After the sort operation is complete, the watch returns to the Telememo
record screen (without the cursor).
• The display can show only three characters at a time, so longer text scrolls
continuously from right to left.
0 to 9
–
(space)
Press D.
Press B.
To delete a Telememo record
1. In the Telememo Mode, scroll through the records and display the one you want to
delete.
2. Hold down A until the flashing cursor appears on the display.
3. Press B and D at the same time to delete the record.
• The message “CLEAR” appears for a few moments, and then the cursor appears
on the display, ready for input.
4. Input data or press A to return to the Telememo record screen.
To recall Telememo records
In the Telememo Mode, press D (+) to scroll through Telememo records on the
display.
• Only the memory number and name of each Telememo record appear on the display
as you scroll through Telememo records.
• Pressing A while the memory number/name screen is on the display changes to
the telephone number screen for that record.
• The display can show only five digits of the telephone number at a time, so longer
numbers scroll continuously from right to left.
To edit a Telememo record
1. In the Telememo Mode, scroll through the records and display the one you want to
edit.
2. Hold down A until the flashing cursor appears on the display.
3. Use C to move the flashing to the character you want to change.
4. Use B and D to change the character.
5. After making the changes that you want, press A to store them and return to the
Telememo record screen.
Alarms
You can set three independent Daily Alarms. When an
alarm is turned on, the alarm tone sounds when the alarm
time is reached. You can also turn on an Hourly Time
Signal that causes the watch to beep twice every hour on
the hour.
• The alarm and Hourly Time Signal operate in
accordance with the current digital time.
• The alarm number (“AL1” though “AL3”) indicates an
alarm screen. “SIG” appears in place of the alarm
number when the Hourly Time Signal screen is shown.
• All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C.
Alarm time
Alarm number
Alarm on indicator
Hourly time signal
on indicator
To set an alarm time
1.In the Alarm Mode, press D to select the alarm whose
time you want to set.
AL1 AL2 AL3 SIG
2.Hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
• This automatically turns on the alarm.
3. Press C to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and B (–) to change it.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (no indicator) or p.m. (P indicator).
• If you have 24-hour timekeeping selected in the Timekeeping Mode, the alarm
time is also displayed in 24-hour format.
5. Press A to exit the setting screen.