Filter
Top Products
2030-3
6. Press C to move the flashing to the first
character of the site name.
7. Input the site name you want.
• Use D and B to cycle through characters
at the current input position in the sequence
shown below.
• When the character you want is shown, press C to move the flashing to
the right and input the next character.
• To delete a character, input a space.
• You can input up to eight characters. Inputting eight characters causes the
flashing to return to the DST On/Off setting. If your site name has fewer
than eight characters, you must press C to skip past all the unused
spaces in order to move the flashing to the DST On/Off setting.
Site name
.
Press D.
Press B.
(space)
0 to 9
A
to
Z
_
8. After the DST On/Off, GMT differential, and site name settings are the
way you want, press A and the longitude setting starts to flash on the
display.
• Pressing C moves the flashing between the settings in the sequence
shown below.
Longitude Hours Minutes
Lunitidal Interval
9. While the longitude setting is flashing, use
D (+) and B (–) to change it.
• Longitude can be specified in the range of
179°W to 180°E, in 1-degree steps.
10.Press C to move the flashing to the
lunitidal interval hours setting, and then use
D (+) and B (–) to change it.
11.Press C to move the flashing to the
lunitidal interval minutes setting, and then
use D (+) and B (–) to change it.
12.After everything is the way you want, press
A to exit the setting screen.
Hours : Minutes
Longitude
MOON DATA MODE
The Moon Data Mode lets you view the Moon age on any date and tide data
during a particular timeframe for the site currently selected in the Site Mode.
Displaying Moon Data
The Moon Data Mode has two screens: a Moon Age Screen and a Tide Data
Screen. Press A to toggle between the two screens.
• The data that appears on the screen in the Moon Data Mode is for the site
that is currently selected in the Site Mode. This means you have to enter
the Site Mode, select the site whose data you want to view, and then enter
the Moon Data Mode to view it.
• If the site name is longer than four characters, the display alternates
between the first four characters and the remaining characters.
Moon Age Screen Tide Data Screen
Press A.
Tide graph
Timeframe
Month – Day
Site name
Moon phase
indicator
Moon age
Viewing the Moon Age for a Particular Date
1. In the Moon Data Mode, press A to
display the Moon Age Screen.
• The initial default date for the Moon Age
Screen when you enter the Moon Data
Mode is the current date as kept in the
Timekeeping Mode.
2. Use D (+) and B (–) to change the date
setting.
• You can select any date from 1995 to 2039.
• The Moon age appears a few seconds after
you select a date.
Month – DayYear
Viewing Tide Data during a Particular Timeframe
1. In the Moon Data Mode, press A to
display the Moon Age Screen.
2. Set the date whose tide data you want to
view.
• The initial default date for the Moon Age
Screen when you enter the Moon Data
Mode is the current date as kept in the
Timekeeping Mode.
• Use D (+) and B (–) to change the date
setting.
• You can select any date from 1995 to 2039.
3. Press A to switch to the Tide Data Screen.
4. Set the timeframe for which you want to display tide data.
• Use D (+) and B (–) to change the time setting in one-hour steps.
• The tide data appears in the tide graph.
Timeframe
ALARM MODE
You can set a Daily Alarm that sounds at the
same time each day, while it is turned on. You
can also turn on an Hourly Time Signal that
causes the watch to beep twice every hour on
the hour.
Setting the Alarm Time
1. In the Alarm Mode, hold down A until the
hour digits of the alarm time start to flash,
which indicates the setting screen.
• This operation automatically turns on the
Daily Alarm.
2. Press C to move the flashing in the
sequence shown below to select other
settings.
3. While the hour or minutes setting is flashing, use D (+) and B (–) to
change it.
• When setting the alarm time using the 12-hour format, take care to set the
time correctly as am (A indicator) or pm (P indicator).
4. Press A to exit the setting screen.
Daily Alarm Operation
The alarm sounds at the preset time each day for about 20 seconds, or until
you stop it by pressing any button.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
Alarm on indicator
Current time
Hour : Minutes
Hourly time signal
on indicator
Hour Minutes
Turning the Daily Alarm and Hourly Time Signal on
and off
In the Alarm Mode, press B to cycle through the on and off settings as
shown below.
ALM ■
SIG ■
ALM
SIG ■
ALM ■
SIG
ALM
SIG
Alarm On
Signal On
Alarm Off
Signal Off
Alarm Off
Signal On
Alarm On
Signal Off
[Alarm ON Indicator / Hourly Time Signal ON Indicator]