Casio 0811-EA Watch User Manual


 
Operation Guide 5002 (GMS)
4
Con guring Home City Settings
$AYHAND
INDICATESCITYCODE

2.
To change the Home City
setting, press
C
to move
the day hand between the
city code positions on the
dial.
See the table below for details
about city code positions.
For some models, city codes
are not marked on the dial.
For some models, city codes
are marked on the back cover
of the watch.
$AY(AND
0OSITION
SECONDS
SECONDS
SECONDS
SECONDS
SECONDS
SECONDS
#ITY.AME
4OKYO
(ONG+ONG
,OS!NGELES
$ENVER
#HICAGO
.EW9ORK
#ITY
#ODE
49/
(+'
,!8
$%.
#()
.9#
54#
/FFSET


n
n
n
n
The contents of the above table are current as of March 2008.
Time offsets for this watch are in accordance with Universal Time
Coordinated (UTC).
)NDICATES
SUMMERTIMESETTING

3.
To change the summer
time setting, press the
A
button to move the left
dial hand between the
three available settings
described below.
AT (AUTO)
This setting enables the auto summer time setting, which
turns summer time on or off in accordance with the received
time calibration signal.
ON
This setting turns on summer time, which advances the time
setting by one hour.
OFF
This setting turns off summer time, and displays the current
time normally.
Summer time, or Daylight Saving Time (DST) as is it is called
in some countries, calls for setting clocks ahead one hour
during the summer season.
Note that the use of summer time depends on the country and
even the local area.
If you only want to change the Home City and summer time
settings, go directly to step 9 of this procedure.
$AYHAND
2IGHTDIALHAND
)NDICATES
THEDAYOF
THEWEEK
4YPE"RIGHTDIALHAND
7.
Press
B
to advance to
current time setting.
The right dial hand will move
to SET and the day hand will
move to A (a.m.) or P (p.m.)
(OURHAND
-INUTEHAND
!AM
HOURHAND
0PM

8.
Press the
C
button to
change the time setting.
Each press of
C
moves
the setting clockwise by
one minute.
Holding down the
C
button
will cause the time setting to
move at high speed. To stop
high-speed hand movement,
press any button.
When setting the time, make
sure that you set it so the day
hand (a.m./p.m.) and 24-hour
hand are in the correct
positions.
9.
When all of the settings
are the way you want,
press
B
. This will exit
the setting mode and the
left dial hand will resume
normal operation.
If you change the Home City
and/or summer time setting,
normal left dial hand operation
will resume after the hour and
minute hands move to their
new positions based on your
setting.
If you change the current time
setting, normal left dial hand
operation will resume from 00.
If you did not change the current time setting, normal left dial
hand operation will resume from the location it was at when
you started the setting procedure above.
The watch will exit the setting screen automatically if you
do not perform any button operation for about two or three
minutes.
When you are using the watch in an area that supports time
calibration signal reception, it will adjust the date automatically
for month lengths and leap years. If you use it in an area
that does not support signal reception, you will have to make
adjustments for month lengths and leap year manually.
You can use the following procedure to set the current time and date
of the Home City that you have selected in the Timekeeping Mode.
Always use the Timekeeping Mode to set and adjust the current
time and date settings.
You also can use the procedures in this section to adjust the
time and date when the watch is unable to receive a time
calibration signal for some reason.
To con gure Home City settings
,EFTDIAL
HAND
$AYHAND
2IGHTDIAL
HAND
)NDICATES
THEDAYOF
THEWEEK
4YPE"RIGHTDIALHAND
1.
In the Timekeeping Mode,
keep
B
depressed (for
about ve seconds) as
the day, right dial, and
left dial hands perform
the sequence described
below.
The day hand moves to the
last signal reception result to
R, and then to the currently
selected city code.
The right dial hand moves to
T. Z (time zone).
The left dial hand moves to
AT , ON, or OFF.
This is the setting mode.
2IGHTDIALHAND
$AYHAND
4.
Press
B
to advance to
day and day of the week
setting.
The day hand and right dial
hand will move to their current
settings.
$AYOFTHE
WEEK
$ATE
5.
Press
C
(+) to change the
day setting.
6.
Press
A
(+) to change the
day of the week setting.