Filter
Top Products
120871.PDF
19
1.1 N•m, 10 In•Lbs
Loctite 242 (blue)
KH048/
2.5 mm
Appy a lm of
grease her
e
Rear Derailleur Hanger
Before re- installing (same or new): Clean dropout and inspect carefully for any cracks or damage.
Clean surfaces and apply a light lm of bike grease to the dropout to minimize any noise or
“creaking” that might result from very slight movement between the dropout and hanger during
movement of the derailleur. Apply grease and Loctite carefully. Do not contaminate the male or
female bolt threads with grease which would cause the Loctite to be ineective.
Check derailleur adjustment after replacement. Readjust wheel quick release so it is very tight.
See PART I Section 4. A in your Cannondale Bicycle Owner’s Manual.
CAUTION
Do not use a derailleur hanger alignment tool to straighten.