Filter
Top Products
20
www.cannondownriggers.com
Programming the Digi-Troll 5
The Digi-Troll 5 contains four menus that enable you to program and customize its operation. Any changes made
using the menu system are automatically saved in permanent memory when the downrigger is turned off.
NOTE: The downrigger must be turned off with the power button for the settings to be saved.
The MENU key is used to enter each of the menus starting from the default screen (referred to as the depth
screen).
Getting Started
The Menu System
The chart below summarizes the Digi-troll 5's menu system in the order of occurrence.
While programming, the UP key is used to increase the value and the DOWN key is used to decrease the
value. Remember during programming, if there is no activity on the keypad for 7 seconds, the menu reverts back to
the main screen.