Filter
Top Products
FOCUSING
1. Adjust interpupillary distance. (Figure 1)
2.
Set the “diopter setting” (Figure 2) to zero and view a distant object.
3. Keep both eyes open at all times.
4. Using a lens cover or your hand, cover the objective (front) lens of
the same side of the binocular that has the “diopter setting.” This
is usually the right side.
5. Using the center focus wheel, focus on a distant object with fine detail (e.g., brick wall,
tree branches, etc.) until it appears as sharp as possible.
6. Un
cover the objective lens on the diopter side, cover the other objective lens, then view the
same object.
7. Using the “diopter setting” adjustment ring, focus the same object being viewed. Caution
should be used as over turning or forcing the diopter eyepiece can cause damage or cause
the eyepiece to break away from the chassis.
8. Your binocular should be adjusted for your eyes. Focus at any far or near distances can
now be attained simply by turning the center focus wheel. Make a note of the diopter
setting for your eyes for future reference.
EYECUPS (Figure 3)
Your Bushnell binocular is fitted with rubber roll-down eyecups
designed for your comfort and to exclude extraneous light. If you wear
sun/eyeglasses, roll down the eyecups. This will bring your eyes closer
to the binocular lens thus providing improved field of view.
DIOPTER SETTING
Fig. 2
ROLL-DOWN EYECUPS
Fig. 3
8