Bushnell 11-8338 Binoculars User Manual


 
TAKE A PHOTO TIPS FOR BETTER QUALITY PHOTOS
Holding the ImageView as steadily as possible with both hands wrapped around the binocular, lightly
press down the SNAP button using the flat end of a finger. Leaning against a wall, tree, etc. to brace
yourself can also help insure the camera does not move as you take the photo. Make sure you are at least
30 feet or more away from your photo subject. Unlike the binocular optics (which will focus down to about
15 ft.), the camera focus is preset and is designed only for distant subjects- your photos may look out of
focus if you were too close.
USING THE IMAGEVIEW WITH YOUR COMPUTER
If you are using Windows 98, install the driver from the CD-ROM as directed in “Software Installation”
before connecting the Imageview to your PC (no driver is necessary with other operating systems). If
desired, you may install Roxio
®
PhotoSuite 5 from the CD-ROM, following the on-screen instructions
(if you do not already have photo software you prefer to use. Note: PhotoSuite is not compatible with
Windows Vista or Mac OS9/OSX). Connect the supplied USB cable between the ImageView and your
computer, using a USB port on the computer itself (avoid USB “hubs”). Please read “Downloading Photos
to Your Computer” for detailed instructions on transferring photos to a PC or Mac computer.
QUICK GUIDE: BUSHNELL IMAGEVIEW 11-8338
FINAL 118338 QVC Imageview 1LIM 4 4 9/17/07 7:48:04 PM