Filter
Top Products
INSTALL BATTERIES
Insert 2 AAA batteries (alkaline, lithium, or NiMh) as indicated inside the battery compartment on
the bottom of the ImageView.
ADJUST THE BINOCULAR FOR COMFORTABLE VIEWING
Adjust the center focus knob while viewing a distant object through the binocular, until it appears
sharp. Move the left and right sides of the binocular closer together or farther apart until you see
a single circular image. Rotate the right eyepiece (diopter adjustment) to change the setting if the
image does not appear as sharp to your right eye as it does to your left eye.
TURN ON THE CAMERA
Press the MODE button briefly, then release it. You will see a battery indicator and 3 digits indicating
the number of photos taken (currently stored in the internal memory). As you take new photos, this
counter will advance. Press and hold MODE to turn off the camera. You should download all photos
before changing batteries or storing the camera unused for a long period of time (more than a few
weeks) as a precaution.
CHECK CAMERA SETTINGS
Make sure the camera is set for high resolution and quality (refer to pg.8, "Setup Menu") if you want
the best results, especially if you will be printing the photos. See “Changing Operational Modes” for
full instructions covering features such as continuous shot, shooting a video clip, and how to delete
a photo you have just taken.
QUICK GUIDE: BUSHNELL IMAGEVIEW 11-8338
FINAL 118338 QVC Imageview 1LIM 3 3 9/17/07 7:48:03 PM