Filter
Top Products
BATTERY INSTALLATION
1) Slide the battery compartment release
switch on the handstrap to the Open
position to release the battery holder.
2) Insert two new size AA alkaline batteries.
3) Attach the battery holder to the handstrap
and slide the release switch to the locked
position to secure the compartment.
WARNING
• NEVER slide the stabilization
lever to the ACTIVE position if
you do not have two batteries
installed. Damage could result.
• Use the same type of batteries. Do
NOT mix old and new batteries.
Doing so can cause leakage or
rupture.
• When changing the batteries
outdoors, be sure not to let
any water get into the battery
compartment.
• If you plan to leave the binoculars
stored for a prolonged period,
remove the batteries in order to
prevent natural discharge and/or
leakage.
When the batteries are removed,
keep the battery holder attached
to the handstrap to protect the
internal contact points.
• Keep the contact points away from
any metal. Damage could result.
4
SPECIFICATIONS
Magnification 10x
Objective Lens Diameter 35mm
Compensation Angle (stabilization correction) 3
Eye Relief 12mm
Field of View 260ft. at 1000yds/86.6m at 1000m
Minimum Focusing Distance 12ft.
Exit Pupil 3..5mm
Interpupillary Adjustment Distance 53 to 74 mm
Dimensions: LxWxH
7.25 x 6 x 3.5 inches (without strap)
Weight 43.9oz/1244g
Battery (2) Size AA alkaline batteries (not included)
Safe Ambient Temperature Range -10 C to 50 C (14 F to 122 F)
Specifications and designs are subject to change without notice.