Filter
Top Products
Congratulations on your purchase of the Bushnell
®
Instant Replay
™
! The Instant Replay is a
unique, exclusive design which combines a premium quality binocular featuring fully multi-
coated lenses and BaK-4 prisms with an integrated digital camera, directing the image from
the binocular’s optics to a 3.2 megapixel CCD sensor. The Instant Replay can be quickly
and easily switched from taking high resolution digital still photos to shooting 30 second
looping video clips. This ensures that you will always capture the peak of the action. Your
photos and videos are both automatically stored in the internal memory, or on an optional
Compact Flash card, and can be instantly reviewed on the flip-up LCD , deleted, viewed on
any TV, or downloaded to your computer without the need to install any special software
(With Windows 2000, XP or Mac. Software is provided for Windows 98/98SE).
Before using your new Instant Replay, please read the instructions contained in this manual
and take time to familiarize yourself with the camera’s operation and many great features.
QUICK GUIDE: BUSHNELL INSTANT REPLAY 18-0833
1
Install Batteries
& (optional) CF
Card
Insert 2 AA size alkaline or lithium batteries into the battery compartment on the right side (Push release
on right of door. Note battery direction marking inside). A Compact Flash card (optional) for increased
photo storage capacity may also be installed in the card slot, located under the door on the left side (Pull
open in a downward direction, using thumb slot. Insert card with label side facing up).
2
Turn On the
Camera
Press and release the Power switch, the power light will change from red to green, and the LCD will
come on. Raise the LCD display, using the tab at the rear. The default settings will provide optimum
quality under most conditions. However, we recommend reading the full manual to take advantage of
the many available options for different situations and personal preferences.
3
Set the Menu
Language and
Date/Time
Press the OK/Menu button, then the Down arrow pad key twice to select the Setup menu list. Press
OK/Menu again, then press Up once to select “Language” and press OK. Select your menu language
from the list, then press OK, which will confirm your setting and return you to the Setup menu. Use
the arrow keys again to select “Time/Date” and press OK. Use the Left/Right keys to step through the
date and time segments, and use the Up/Down keys to set the date and time. When you are finished
setting the date/time, press OK, then press the Left arrow key to exit the Setup and return to the live
preview display.
4
Format the CF
Card (optional)
If you inserted a Compact Flash card earlier, format it before using the camera. Go to “ Format” in the
Setup Menu, and press OK. Select“Yes” and press OK to confirm you want to format the card. Press
the left arrow key to exit Setup.
5
Setup the
Binocular
Optics for Your
Eyesight
Pull the rubber eyecups straight up if you are not wearing glasses. Grasp the left and right sides of the
Instant Replay, and pull the halves apart while looking through the binocular to adjust the eyepiece
spacing until your view is a single circular image. Then, find a distant object with fine detail, and
adjust the center focus knob until the object appears sharp on the LCD (press the “up” arrow key for
a 3x magnified preview). Now look through the left eyepiece. If the object does not appear sharp, you
may need to make a simple, one-time adjustment to “fine tune” the left eyepiece for your vision so it
matches the camera focus. Refer to the “Basic Binocular & Camera Setup” section of this manual if
that is necessary.
2
3
18-0833 6LIM.indd 2-3 1/28/05 2:47:35 PM