Filter
Top Products
USING the MINI TRIPOD
• Loosen the knob (A) at the base of the collapsible
tripod legs. Unfold the legs fully and set the tripod on a
stable, level surface such as a table or the ground.
• Make sure the upper section of the tripod is level and
securely attached to the top plate (B) of the lower
section, by tightening the C-clamp bolt (C).
• Turn the mounting screw knob (D) to attach the scope’s
mounting base securely to the tripod platform (E) (do
not overtighten).
• Twist the pan/tilt handle (F) counter-clockwise to
loosen it, tilt the tripod head until the mounting
platform is level with the ground, then twist the handle
clockwise to tighten it.
• To tilt the scope vertically, twist the pan/tilt handle
counter-clockwise to loosen it rst, then tilt the tripod
head up or down. To pan the scope left or right, loosen
the pan lock knob rst, then use the pan/tilt handle to rotate the tripod platform.
• The top section of the mini tripod may also be used as a car window mount. Loosen the
C-clamp bolt (C), and remove the top section. Roll down your window partially, leaving
enough of it up to place the C-clamp on, with the bolt knob facing you. Tighten the knob to
secure the mount in place, being careful not to cause damage to the window (avoid using the
mount on windows with signicant curvature).
E
D
F
A
C
B
Note: appearance and
features of tripod are
subject to change.