Filter
Top Products
8
REPLACING THE BATTERY
Y
our new Bushnell First Strike electronic sight is
powered by one 3V “coin-style” lithium battery, Type
2032 (I) (pre-installed). Should your reticle grow dim
or not light at all, you will need to replace the battery.
To install a new battery, use the provided small hex
wrench (M) to loosen the two bolts (G) on the top
panel. Remove the top section of the sight and insert
the battery “+” side up as shown in the Parts Guide.
Replace the top section and tighten the bolts (G).
Distance 1 Full Revolution of Adjustment Screw
25 yds 12.5 inches
50 yds 25 inches
100 yds 50 inches
Distance 1 Hash Mark of Adjustment Screw
25 yds 1.5 inches
50 yds 3 inches
100 yds 6 inches
Point of Impact Change Chart