Filter
Top Products
6
GETTING STARTED
OPERATIONAL SUMMARY
While looking through the Elite™ ARC™, depress the power button once to activate the Vivid Display. Place the
aiming circle (located in the center of the eld of view) upon a target at least yards away, depress and hold the power
button down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the
aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power
button. e crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the
laser is no longer being transmitted). Note: Once activated, the display will remain active and display the last distance
measurement for seconds. You can depress the power button again at any time to distance to a new target. As with
any laser device, it is not recommended to directly view the emissions for long periods of time with magnied lenses.
e maximum time the laser is transmitted (red) is seconds. To re-re, press the button down again.