Bushnell 20-4124EU Hunting Equipment User Manual


 
13
The front mount has a key that fits into the slots on the riflescope dovetail. Choose the appropriate slot
and attach the front mount securely with the two scope dovetail screws. The rear mount does not have
a key allowing it to slide forward or backward on the dovetail of the riflescope to fit. Loosely place it on
the riflescope dovetail – leave the two screws loose for now so that the mount can slide on the dovetail.
Place the riflescope on the rifle, fitting the front and rear mounts to the weaver bases. Space the mounts
as far apart as possible to provide stability. Lightly tighten the screws holding the mounts to the weaver
bases.
Now look through the scope in your normal shooting position. Adjust the scope
(either forward or backward with the mounts) until you find the
furthest point forward (to insure maximum eye relief)
that allows you to see a full field of view.
Tighten the mounting screws
as tight as possible.
(Figure 8)
Key
Front Mount
Rear Mount