Bushnell 202356 Hunting Equipment User Manual


 
13
SETUP MENU NORMAL OPERATING MENU
When the unit automatically powers down, operation will always return to the normal operation (i.e. away
from SETUP) with the last used ARC™ mode active (i.e. BOW, RIFLE, or REGULAR) along with the last used
TARGETING modes active (Standard SCAN, BULLSEYE, or BRUSH). If the unit turns o while in the SETUP
menu, the unit will always return to the last mode(s) still active.
Once the range is displayed, continue to hold the POWER button down for approximately  seconds while holding
the aiming circle on the object and keeping the unit as steady as possible so as to allow the inclinometer enough time
to measure angle. en release the POWER button. Once you have released the power button, the line of sight will be
displayed along with unit of measure. Beneath the line of sight distance and unit of measure, the degree of angle will
be displayed for approximately . seconds, and will then automatically switch to the compensated range. e line of
sight distance, unit of measure and automatic toggle from degree of angle to compensated distance will continue for
 seconds at which time the display will automatically shut o.
BOW MODE EXAMPLE
Line of sight is  yards, angle is - degrees, and the Angle Range Compensated distance is  yards. Instead of
shooting as  yards, shoot as  yards. If you were to shoot as if  yards, you would shoot over the top of the deer
because of the severe angle.
SETUP Menu Normal Operating Menu