Filter
Top Products
18
If you cannot nd your load in our ballistic tables, you can still use the bullet drop feature of the laser rangender.
As above, sight in your rie at yds. en shoot the rie, without adjusting the riescope, at yds. Measure the
bullet drop from the point of aim. Using this drop, select the ballistic group from below. If you will be shooting longer
distances then you may want to check the bullet drop at yds. Because there is enormous variation in rie barrels,
chambers, and hand loads, you should thoroughly test the ballistic setting before actual hunting. You may need to
move up or down one group depending upon your tests.
If Bullet Drop is: @300 yds @300 m @500 yds @500 m
Use:
A 25–3
1
inches 63–79 cm
11
4–
1
46 inches 29
1
–370 cm
B 20–25 inches 50–63 cm 88–
11
4 inches 225–29
1
cm
C
1
6–20 inches 40–50 cm 72–88 inches
1
82–225 cm
D
1
3–
1
6 inches 34–40 cm 6
1
–72 inches
1
55–
1
82 cm
E
1
2–
1
3 inches 30–34 cm 55–6
1
inches
1
39–
1
55 cm
F
1
0–
1
2 inches 25–30 cm 47–55 inches
11
9–
1
39 cm
G 8–
1
0 inches 20–25 cm 39–47 inches 99–
11
9 cm
H Less than 8 inches Less than 20 cm
Less than 39 inches
Less than 99 cm