Filter
Top Products
8
UNIT OF MEASURE OPTIONS
The Scout™ 1000 can be used to measure distances in yards or meters. The unit of measure indicators
are located in the lower right portion of the LCD. To select between yards and meters, press and release
the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the “MODE”
button (left side of the unit) and hold it down for approximately 5 seconds. The word “SETUP” will
appear at the top if the LCD display and the current unit of measure, “Y” for yards or “M” for Meters will
flash in the LCD and the SETUP icon will still be displayed. Pressing the MODE button will toggle the unit
of measure.
When the desired unit of measure is displayed, press the POWER button to accept the unit of measure
and to return to the normal operating menu. The Scout™ 1000 will return to the last unit of measure
setting used each time the unit is turned on.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has
been acquired, you can release the power button. The crosshairs surrounding the circle will disappear
once the power button has been released (i.e. the laser is no longer being transmitted).