Filter
Top Products
BATTERY INSTALLATION
1) Slide the battery compartment release
switch on the handstrap to the Open
position to release the battery holder.
2) I
nsert two new size AA alkaline batteries.
3)
Attach the battery holder to the handstrap
and slide the release switch to the locked
position to secure the compartment.
WARNING
• NEVER slide the stabilization
lever to the ACTIVE position if
you do not have two batteries
installed. Damage could result.
• Use the same type of batteries. Do
NOT mix old and new batteries.
Doing so can cause leakage or
rupture.
• When changing the batteries
outdoors, be sure not to let
any water get into the battery
compartment.
• If you plan to leave the binoculars
stored for a prolonged period,
remove the batteries in order to
prevent natural discharge and/or
leakage.
When the batteries are removed,
keep the battery holder attached
to the handstrap to protect the
internal contact points.
• Keep the contact points away from
any metal. Damage could result.
4
SPECIFICATIONS
Magnification 10x
Objectiv
e Lens Diameter 35mm
Compensation Angle (stabilization correction) 3
Eye Relief 12mm
Field of View 260ft. at 1000yds/86.6m at 1000m
Minimum Focusing Distance 12ft.
Exit Pupil 3..5mm
Interpupillary Adjustment Distance 53 to 74 mm
Dimensions: LxWxH 7.25 x 6 x 3.5 inches (without
strap)
W
eight 43.9oz/1244g
Battery (2) Size AA alkaline batteries (not included)
Safe Ambient Temperature Range -10 C to 50 C (14 F to 122 F)
Specifications and
designs are subject to change without notice.