Burley HD 4485/86/87 Bicycle Accessories User Manual


 
13
Burley Cub Owner’s Instruction and Safety Manual
Shoulder Harness Pad
Insert the shoulder straps into the
shoulder harness pad as shown in the
drawing at right. The shoulder straps
should be oriented so that the FLAT
parts of the male buckles are facing
toward each other.
VII. Hitching the Burley Cub to Your Bicycle
The trail er hitch was designed to quick ly and safe ly at tach to vir tu al ly all types of
bi cy cles. It is in sert ed in front of the left rear drop out of your bicycle.
Hitching the Trailer to Your Bicycle
1. Loos en the knob on the eye bolt un til the two arms are spread fully apart.
2. Slip the low er hitch arm un der the chain stay (A) and the up per arm above the
seat stay (B).
3. Wedge the hitch cone all the way back into the an gle formed by the stays at the
wheel.
4. Tight en the knob un til the arms are fi rm ly clamped against the stays. Wrap the
safe ty strap around the in side of the chain stay, over the hitch body, and back to
the D-ring at the end of the tongue.
Make sure that the cone is wedged se cure ly into the stays. The knob should be
nger-tight; do not overtighten. The hitch should not move, but should al low the
bi cy cle com plete move ment, in clud ing ly ing it down on the ground. It should clear
A
B