Filter
Top Products
ASUS CUPLE-VM User’s Manual 65
4. BIOS SETUP
4. BIOS SETUP
Power Up Control
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the power has
been interrupted. [Disabled] leaves your system off and [Enabled] reboots your sys-
tem. [Previous State] sets your system back to the state it is before the power inter-
ruption. Configuration options: [Disabled] [Enabled] [Previous State]
PWR Up On External Modem Act [Disabled]
This setting powers up the computer whenever the external modem receives a call
while the computer is in Soft-off mode. NOTE: The computer cannot receive or
transmit data until the computer and applications are fully running. Thus connection
cannot be made on the first try. Turning an external modem off and then back on
while the computer is off causes an initialization string that will also cause the sys-
tem to power on. Configuration options: [Disabled] [Enabled]
Wake On LAN or PCI Modem [Disabled]
Wake-On-LAN/PCI Modem allows your computer to be booted from another com-
puter via a network by sending a wake-up frame or signal. Configuration options:
[Disabled] [Enabled]
IMPORTANT: This feature requires an optional network interface card with Wake-
On-LAN and an ATX power supply with at least 720mA +5V standby power.
4.5.1 Power Up Control