Filter
Top Products
The information in this manual furnished for information use only, is subject to change without notice,
is not to be construed as a commitment by ATN Corp.
The information in this manual furnished for information use only, is subject to change without notice,
is not to be construed as a commitment by ATN Corp.
The information in this manual furnished for information use only, is subject to change without notice,
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
©2004 ATN Corp. All right reserved.
FEATURES
• Rugged and versatile construction.
• All glass multi-coated lenses for superb clarity
and brightness.
• Revolutionary F1.4 112 mm lens with amazing
light transmission.
• Detachable, most powerful in the industry
450mw Infrared Illuminator with dedicated
windage and elevation adjustments .
• Camera/camcorder adaptable for night time pho-
tography (optional camera adapter required).
• Weather Resistant.
• Two year warranty (optional extended warranty).
Power
switch
Picatinny rails
Focusing
system
system
5 Diopter
Battery
housing
Picatinny rails
Camera adapter
APPLICATION
MO5-2 is a top-notch night vision monocular.
A power super fast lens system combined with
a high resolution Gen.2 light intensifier tube
gives the user an unparalleled bright image in
a 2nd gen. night vision device. Easy one switch
controls, 4x magnification and 450mw Infrared
Illuminator for viewing in total darkness are just
a few of the features this scope packs.
The MO5-2 Night Vision Monocular is a complex
opticoelectronic system for individual use. The
device consists of an objective lens assembly,
eyepiece and a body. The body contains 2nd
Gen. image intensifier tube assembly with an
integrated high voltage power source and a
battery housing. When installing the battery
one should keep in mind that the battery polar-
ity should coincide with the diagram on the body
next to the battery housing cap.
Objective lens protective cover is intended to
protect objective lens from dust and scratches.
It also will act as a daylight filter, allowing you
to test the scope in daylight or other bright light
situations. The pinhole in the center of the pro-
tective cover allows a user to check an opera-
tion ability of the device in daylight conditions.
NOTE:
Do not test the scope in daylight condi-
NOTE: Do not test the scope in daylight condi-NOTE:
tions even with the daylight filter/lens cap on for
more than ten (10) minutes.
OPERATION
• Take the monocular out of the case.
• Install the battery into the housing with the
polarity order as shown on the scope. Battery
Type: 3 Volt Lithium, #CR123A .
•
Slide the switch
to turn the unit on with the pro-
tective lens cover still attached to the lens.
Do
not turn the unit on in the daytime without
the protective lens cap on
. You should see
green glow in the eyepiece.
• Observe the scene and adjust the diopter for
optimal image clarity. Focus the front lens until
the image and the grain are both sharp.
• You may now enter a dark environment or simply
shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter. Adjust
the front lens for distance of the focus. You
should not have to readjust the diopter.
NOTE:
We suggest that you focus the diopter
during daylight with the filter on.
NOTE:
The front lens should be readjusted as
you view objects at different distances.
• To turn the unit off
slide the switch
to OFF posi-
tion .
SPECIFICATIONS
Total Darkness Technology
................
Standard
Magnification
................................................
4X
Intensifier Tube
...................
High Res. 2nd Gen
Detection Range
............................
200 m/yards
Recognition Range
........................
150 m/yards
Lens System
..........
5 elements, F1:1.4, 112 mm
FOV
...............................................................
.
9°
Diopter Adjustment
.......................................
±5
Resolution
...........................................
40 lp/mm
Power Supply
.......................
One 3 Volt Lithium
Range Of Focus
............................
5m to Infinity
Controls
...................................................
Direct
Battery Life
.....................................
10-20 Hours
Operating Temperature
............
-40°C to +40°C
Dimensions
..........
335 mm X 100 mm X 110 mm
.................................................
13” X 3.9” X 4.3”
Weight
......................................
1.58 kg/3.48 lbs
F1:1.4, f112mm
front lens
system