Filter
Top Products
13
HFBR-5203, -5204 and -5205 Series
Transmitter Electrical Characteristics
(T
A
= 0°C to 70°C, V
CC
= 4.75 V to 5.25 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Supply Current I
CC
145 185 mA Note 3
Power Dissipation P
DISS
0.76 0.97 W
Data Input Current - Low I
IL
-350 0 µA
Data Input Current - High I
IH
14 350 µA
HFBR-5203, -5204 and -5205 Series
Receiver Electrical Characteristics
(T
A
= 0°C to 70°C, V
CC
= 4.75 V to 5.25 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Supply Current I
CC
82 145 mA Note 4
Power Dissipation P
DISS
0.3 0.5 W Note 5
Data Output Voltage - Low V
OL
- V
CC
-1.840 -1.620 V Note 6
Data Output Voltage - High V
OH
- V
CC
-1.045 -0.880 V Note 6
Data Output Rise Time t
r
0.35 2.2 ns Note 7
Data Output Fall Time t
f
0.35 2.2 ns Note 7
Signal Detect Output Voltage - Low V
OL
- V
CC
-1.840 -1.620 V Note 6
Signal Detect Output Voltage - High V
OH
- V
CC
-1.045 -0.880 V Note 6
Signal Detect Output Rise Time t
r
0.35 2.2 ns Note 7
Signal Detect Output Fall Time t
f
0.35 2.2 ns Note 7
Agilent offers two such
compatible Duplex SC connec-
tored jumper cable assemblies to
assist you in the evaluation of
these transceiver products. These
cables may be purchased from
Agilent with the following part
numbers.
1. HFBR-BKD001
A duplex cable 1 meter long
assembled with 62.5/125 µm fiber
and Duplex SC connector plugs
on both ends.
2. HFBR-BKD010
A duplex cable 10 meters long
assembled with 62.5/125 µm fiber
and Duplex SC connector plugs
on both ends.
Accessory Duplex ST
Connectored Cable Assemblies
Agilent recommends the use of
Duplex Push-Pull ST connectored
cable for optimal repeatibility of
the optical power coupling.