Chapter 26 System Log
X6004 User’s Guide
233
26.3.1 Active Log Summary
The Active Log Summary screen allows you to view and edit the categories the X6004 logs
in the internal and external log servers. Click the Active Log Summary button in the Report
> LOGS > System Log > Log Setting screen to view the screen as shown next.
Figure 205 Report > LOGS > System Log > Log Setting > Active Log Summary
Each field is described in the following table.
Table 107 Report > LOGS > System Log > Log Setting > Active Log Summary
LABEL DESCRIPTION
Active Log
Category
Enter the telephone number you want to block from calling you when you enable
call blocking. Click Add and the number you entered displays in the field below.
Log Category This column displays the source of log events that you can record on the X6004.
The categories are:
• All Logs - all logs generated on the X6004.
• IPPBX - all activities related to the PBX functions of the X6004. For example, a
an FXS card failure.
• User - administrator activity, such as a successful login.
• myZyXEL.com - service registration with the myZyXEL.com website
• Default - All other logs generated by the X6004. For example, failure to reach
a DHCP server.
System Log Select whether you want to enable logging and the types of logs to record for each
source of logs as described in the Log Category field. The choices are:
• Disable All Logs - Do not log any events.
• Enable Normal Logs - Log all events excluding debug events. Debug logs are
used by service technicians and development engineers.
• Enable All Logs - Log all events.
E-mail Server 1/2 Select whether you want to send logs to the e-mail address of an administrator
you specify in the Log Setting screen.
• Enable Normal Logs - Select this to send logs to an administrator at the time
interval you specify in the Log Setting screen.
• Enable Alert Log - Select this to send e-mail alerts to an administrator when
emergency, alert or critical level logs are created on the X6004.
Remote Server 1
.. 4
Select whether you want to send logs to the syslog servers you configure in the
Log Setting screen. For each syslog server choose one of the following options:
• Disable All Logs - Do not send any log events.
• Enable Normal Logs - Send all logs excluding debug events. Debug logs are
used by service technicians and development engineers.
• Enable All Logs - Send all logs.
