VES-1000 Series Ethernet Switch
System Maintenance 2 11-3
Figure 11-3 Menu 24.11 – Remote Management Control
Table 11-B Menu 24.11 – Remote Management Control
FIELD DESCRIPTION EXAMPLE
TELNET/FTP/ICMP
Server Access
Press the [SPACE BAR] to select Enable and then press [ENTER] to
allow remote Telnet, FTP and/or ICMP service.
Enable
Service Port Many residential broadband ISP accounts do not allow you to run any
server processes (such as an FTP server) from your location. If you
wish to run such a server from your location, you must change the
default service port number. Type in the new service port number here
that corresponds to the new port number you configured on the server.
23
Edit Secured Clients Secured clients are trusted computers that may access the defined
services on the VES-1000 Series switch. Press [SPACE BAR] once to
select Yes and then press [ENTER] to go to SMT Menu 24.1.1 –
Secured Client Sets.
No
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to
save your configuration, or press [ESC] to cancel.
11.3.1 Secured Client Sets
Press [SPACE BAR] once in the Edit Secured Clients field (menu 24.11) to select Yes and then press [ENTER]
to go to SMT Menu 24.1.1 – Secured Client Sets. This is a read-only menu.
Menu 24.11 — Remote Management Control
Service Access:
TELNET service= Enable
Server Port= 23
FTP Service= Enable
Server Port= 21
ICMP Service= Enable
Edit Secured Clients= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
