Chapter 5 The Web Configurator
MGS-3712/MGS-3712F User’s Guide
64
5 Wait for the “Starting XMODEM upload” message before activating XMODEM
upload on your terminal.
6 After a configuration file upload, type atgo to restart the Switch.
Figure 35 Resetting the Switch: Via the Console Port
The Switch is now reinitialized with a default configuration file including the default
password of “1234”.
5.7 Logging Out of the Web Configurator
Click Logout in a screen to exit the web configurator. You have to log in with your
password again after you log out. This is recommended after you finish a
management session for security reasons.
Figure 36 Web Configurator: Logout Screen
ootbase Version: V0.4 | 12/13/2007 01:35:53
RAM: Size = 65536 Kbytes
DRAM POST: Testing: 65536K
OK
FLASH: AMD 64M *1
CACHE_WB 266Mhz brcmConf=e3800000(I-ON, D-ON)
ZyNOS Version: V3.90(BBA.0)b0 | 09/03/2008 17:16:26
Press any key to enter debug mode within 3 seconds.....................
Enter Debug Mode
ras> atlc
Starting XMODEM upload (CRC mode)....
CCCCCCCCCCCCCCCC
Total 393216 bytes received.
Erasing..
................................................................
OK
ras> atgo
