Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
367
mode <index-
priority|round-
robin>
Specifies the mode for TACACS+
server selection.
13
time <Hour:Min:Sec> Sets the time in hour, minute and
second format.
13
date <month/day/
year>
Sets the date in year, month and
day format.
13
daylight-saving-
time
Enables daylight saving time. 13
end-date <week>
<day> <month>
<o’clock>
Sets the day and time when
Daylight Saving Time ends.
13
help Displays help for the daylight-
saving-time command.
13
start-date
<week> <day>
<month>
<o’clock>
Sets the day and time when
Daylight Saving Time starts.
13
help Displays help information. 13
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
13
timesync <daytime|time|ntp> Sets the time server protocol. 13
server <ip> Sets the IP address of your time
server.
13
trtcm Enables Two Rate Three Color
Marker on the Switch.
13
mode <color-
aware|color-blind>
Sets the mode for Two Rate
Three Color Marker on the
Switch.
13
trunk <T1|T2|T3|T4|T5|T6
>
Activates a trunk group. 13
<T1|T2|T3|T4|T5|T6
>lacp
Enables LACP for a trunk group. 13
<T1|T2|T3|T4|T5|T6
>interface <port-
list>
Adds a port(s) to the specified
trunk group.
13
interface <port-
list> timeout
<lacp-timeout>
Defines the port number and
LACP timeout period.
13
vlan <vlan-id> Enters the VLAN configuration
mode. See Section 45.12.6 on
page 375 for more information.
13
vlan1q gvrp Enables GVRP. 13
port-isolation Enables port-isolation. 13
vlan-
stacking
Enables VLAN stacking on the
Switch.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
