ES-4024A User’s Guide
Chapter 38 Command Examples 235
Figure 146 no mirror-port Command Example
38.6.2 no trunk
Syntax:
no trunk <T1|T2|T3|T4|T5>
no trunk <T1|T2|T3|T4|T5> lacp
where
• An example is shown next.
• Disable trunk one (T1).
• Disable LAPC on trunk three (T3).
Figure 147 no trunk Command Example
38.6.3 no port-access-authenticator
Syntax:
no port-access-authenticator
interface port-channel <port-list> no port-access-authenticator
interface port-channel <port-list> no port-access-authenticator
reauthenticate
where
An example is shown next.
• Disable port access authentication on the switch.
• Disable port access authentication on ports 10 to 15.
• Disable reauthentication on the ports.
ras(config)# no mirror-port
<T1|T2|T3|T4|T5>
Disables the trunk group.
<T1|T2|T3|T4|T5> lacp
Disables LACP in the trunk group.
ras(config)# no trunk T1
ras(config)# no trunk T3 lacp
= Disables port authentication on the switch.
<port-list>
= Specifies the port(s).
