1, 2
At the SETUP screen.
Press
DD
/
EE
to select Digital Audio Output and
press
GG
.
Press
DD
/
EE
to select the desired output and
press SELECT/ENTER.
DOLBY DIGITAL/PCM:
Select “DOLBY DIGITAL/PCM” if
an active digital output is supplied to Dolby Digital decoder,
(or an amplifier or other equipment with Dolby Digital
decoder).
Stream/PCM: Select “Stream/PCM” if an active
digital output is supplied to an amplifier or other
equipment with DTS decoder, Dolby Digital decoder and
MPEG decoder.
PCM: Select “PCM” if an active digital output is
supplied to an amplifier or other equipment with linear PCM
only (or MD recorder or DAT deck).
❍
When you are not using the player’s digital audio output, don’t
select any of the options.
❍
If an active digital audio output signal is supplied to an receiver
or other equipment without a corresponding digital decoding
capability, a very loud noise may be produced which could
permanently damage the speakers.
❍
The DTS DVD disc sound is played back only when the DVD
player is connected with amplifier with a DTS decoder.
2
1
Each DVD disc has a variety of audio output
options. Set the player’s Digital Audio Output
according to the type of audio system you use.
Notes
Playback
Disc
96 kHz
Linear PCM
DVD
DTS DVD
Dolby Digital
DVD
MPEG DVD
Audio CD
DTS Audio CD
Stream/PCM
PCM
DTS bit Stream
Dolby Digital
bit Stream
MPEG bit Stream
PCM
DTS bit Stream
OUTPUT
Dolby Digital/
PCM
PCM
Not Output
Dolby Digital
bit Stream
PCM
PCM
DTS bit Stream
PCM only
PCM
Not Output
PCM
PCM
PCM
DTS bit Stream
