A SERVICE OF

logo

3-40
IGNITION TIMING CHECK
INSP
ADJ
7. Adjust:
9Ignition timing
Adjustment steps:
9Loosen the screws (stator) 1.
9Align the punch mark on the rotor with
punch mark on the stator 2 by moving the
stator.
9Tighten the screws (stator).
Screw (stator):
8 Nm (0.8 m•kg, 5.8 ft•lb)
5MV-9-10-3B 6/12/00 8:23 PM Page 21