ENGLISH
YDP-S30 Owner’s Manual
36
6 Connect the AC adaptor.
6-1 Insert the AC adaptor plug into the DC-IN
12V jack from the rear.
6-2 Attach the cord holder on the right (or left)
end (whichever is closer to an AC outlet) of
F, then clip the power cord into the holder.
After completing the assembly, please
check the following.
CAUTION
When moving the instrument after assembly,
always hold instrument by the lower surface in the
front of the main unit and by the handles in the
rear panel.
Do not hold the key cover or top portion. Improper
handling can result in damage to the instrument or
personal injury.
1
2
F
• Are there any parts left over?
➝ Review the assembly procedure and correct any
errors.
• Is the instrument clear of doors and other mov-
able fixtures?
➝ Move the instrument to an appropriate location.
• Does the instrument make a rattling noise when
you shake it?
➝ Tighten all screws.
• Are the pedal and power cords inserted securely
into the sockets?
➝ Check the connection.
• If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the
assembly diagrams and retighten all screws.
34
