A SERVICE OF

logo

7
English
If your amplifier has two sets of speaker terminals
For connections, cut the speaker wires as short as possible. If
the connections are faulty, no sound will be heard from the
speakers. Make sure that the polarity of the speaker wires is
correct, that is, + and – markings are observed. If these wires
are reversed, the sound will be unnatural and will lack bass.
Do not let the bare speaker wires touch each other and do
not let them touch the metal parts of this unit as this could
damage this unit, your amplifier and/or speakers.
How to Connect:
Red: positive (+)
Black: negative (–)
1Unscrew the knob.
2Insert the bare wire.
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
3Tighten the knob and
secure the wire.
* Banana Plug connections are also possible. Simply insert
the Banana Plug connector into the corresponding terminal.
Connecting to this unit’s OUTPUT/INPUT terminals
INPUT1INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
ONOFF
AUTO
POWER
HIGH CUT
STANDBY
-
RED
ON
-
GREEN
VOLUME
150 Hz
010
50 Hz
POWER
OFF
ON
AB
INPUT1INPUT2
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
1
2
3
This unit
(Both “A” and “B” outputs
must be ON.)
Left speakerRight speaker
Amplifier
To AC outlet