49 En
XM Satellite Radio tuning
English
BASIC
OPERATION
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode”
on page 48.
1 Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
See “Basic XM Satellite Radio operations” on
page 47 for details.
2 Press
FMEMORY
(or
9MEMORY
).
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
You must proceed to and carry out steps 3 through 5 while
the MEMORY indicator is flashing in the front panel
display.
3 Press
DCATEGORY
(or
8A-E/CAT.
l / h)
repeatedly to select a preset channel group
(A to E) while the MEMORY indicator is
flashing.
The preset channel group letter appears in the front
panel display.
4 Press
EPRESET/TUNING/CH
l / h (or
8PRESET/CH
k / n) repeatedly to select a
preset channel number (1 to 8) while the
MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
5 Press
FMEMORY
(or
9MEMORY
) to set
the selected XM Satellite Radio channel as a
preset channel while the MEMORY indicator
is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
Once you set a new preset channel, the one previously stored in
the same preset channel group and number is cleared.
Setting XM Satellite Radio preset
channels
Note
043XMU
Currently selected channel number
MEMORY
Flashes
Note
MEMORY
C- 043XMU
Selected preset channel group
Flashes
MEMORY
C5 043XMU
Selected preset channel number
Flashes
C5:043XMU
Colon (:)
01EN_RX-V463_U.book Page 49 Friday, February 1, 2008 11:43 AM
