USER’S MANUAL
Trouble Shooting
POSSIBLE CAUSE
☞
Check the power cable, power supply output and video
connection between the camera and monitor.
☞
Are the camera lens or the lens glass dirty?
Clean the lens / glass with a soft clean cloth.
☞
Adjust the monitor controls, as required.
☞
If the camera is facing a very strong light, change
the camera position.
☞
Adjust the lens focus
☞
Adjust the contrast control of the monitor.
☞
If there is an intermediate device, correctly set the 75/Hi-z.
The camera is not
☞
Check the camera is correctly connected to an appropriate
regulated power source.
☞
Has MOTION DET been set to ON in the menu?
☞
Has MD AREA been properly defined?
☞
Check the settings in WHITE BALANCE menu.
☞
Make sure that the camera isn’t facing direct sunlight or
Fluorescent lighting
.
If necessary, change the camera position.
working properly
the camera is hot.
Motion Detection
is not activated.
The color of the
picture is not correct.
The image on the
screen flickers.
The SENS-UP does
not work.
20
PROBLEM
Northing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
and the surface of
☞
Check that the AGC setting in the EXPOSURE menu isn't set to OFF.
☞
Check the EXPOSURE menu and make sure SHUTTER is set to------.
