A SERVICE OF

logo

Open as PDF
next previous
To replace module:
1.
Line up the venturi (burner inlet
tubes) with the burner orifices.
2 Push the module until it is seated
property.
3. Lower front with the handle.
4. Instatl surface burner caps and
grates.
To Install optlonal griddle module:
The griddle module will work only on the
right side of the cooktop.
1. Remove
the grill sections.
2. Place the griddle over burners with
drain slot in back
To remove module:
1.
Lift front slightly by both front comers
and set aside.
2 Replace the grill sections.
13