2–3
SCANTEAM 3700 Wedge Technical Manual
2.3 Terminal Selection Programming Instructions
Use this section to program the 3700 Wedge to work with any supported terminal or
computer.
➊ Locate the twoĆdigit terminal I.D. number for your terminal or computer.
➋ Scan the Program Terminal Interface bar code.
To program the 3700 Wedge:
➍ Scan the bar code representing the second digit of the terminal I.D.
number. (e.g., for an IBM AT, scan the number 3.)
➌ Scan the bar code representing the first digit of the terminal I.D. number.
(e.g., for an IBM AT, scan the number 0.)
Program Terminal Interface
0 1
IBM PC/XT 01
Terminal/Model Terminal ID
Program Terminal Interface
0 2
IBM PS/2 25, 30 02
Terminal/Model Terminal ID
Program Terminal Interface
0 3
IBM AT, PS/2
30-286, 50,
55SX, 60, 70,
70-061,
70-121, 80
03
Terminal/Models Terminal ID
If you wish to program a carriage return (CR) suffix or turn off the carriage return (or any other
suffix), see the Quick Suffix Selections" on the next page.
Your terminal interface is set up.
