36
troubleshooting
TROUBLESHOOTING YOUR ELLIPTICAL TRAINER
Our Elliptical Trainers are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps may indicate
the cause.
PROBLEM: The Console does not light up (Model X6000DA only).
SOLUTION: Batteries are too weak; replace them.
PROBLEM: The Elliptical Trainer appears to work but there is no
resistance change.
SOLUTION: The magnetic brake assembly is not working properly;
please contact your retailer.
PROBLEM: The Elliptical Trainer makes a squeaking or creaking noise.
SOLUTION (All models): Check and tighten all the bolts on the Elliptical
Trainer again.
SOLUTION (Dual-Action models only): Lubricate the bushings in the
Dual-Action link arms.
NOTE: If the above steps do not remedy the problem, discontinue use,
turn the power off and contact your retailer.
ALL MODELS
