ViewSonic 36 PJ513D/PJ513DB
Lamp
Settings
Lamp Mode (Normal)
Setting the projector in Economic mode also extends the lamp timer
automatic shutdown feature. See "Setting Lamp Mode as Economic"
on page 38 for details.
Reset Lamp Timer
Once the lamp is renewed, select Reset to return the lamp timer to '0'.
See "Resetting the lamp timer" on page 41 for details.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used. See "Getting to
know the lamp hour" on page 38 for details on how the total lamp
hour is calculated.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Projector Position, Language,
High Altitude Mode, Phase, User 1, User 2, Position, H. Size.
INFORMATION menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable
adjustments are not shown on the screen.
FUNCTION DESCRIPTION
Current System
Status
Source
Shows the current signal source.
Preset mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color system
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent lamp hour
Displays the number of hours the lamp has been used.
