Trouble Shooting Sanitizing Wand
17
Setting and Using SLEEP SET
Your Rise & Shine
®
allows you to fall asleep gradually, using one of three Sleep
Cycle Durations: 5, 15 or 30 minutes and other options listed below.
During the cycle, the volume of the sound and/or the brightness of the light will
gradually decrease allowing you to fall asleep gently.
To use the Sleep option, press the SLEEP button. SLEEP will be shown on the
bottom right of the display.
Sleep setting options are:
• Duration
• Light
• Backlight
• Sound
• Play Mode
You may also set the maximum LED light panel brightness for the start of the
Sleep Cycle.
Choosing SLEEP SETTINGS Options
1. Press the MENU button.
2. The Main Menu is displayed.
2. Press the Selector Control Dial.
3. From the WAKE PLAY MODE sub-menu, turn the
Selector
Control Dial
to choose CONTINUOUS or REPEAT. Choosing
CONTINUOUS will begin playing with the audio fi le chosen
in the SOUND setting (for either SD or USB) and then play subsequent tracks, in
sequence, as they are arranged on the SD Card or USB device. REPEAT will play
and continue to repeat the track chosen in SOUND.
4. Press the Selector Control Dial to choose the displayed Play Mode setting.
The display returns to the WAKE SETTINGS menu.
Highlight PREVIOUS and push the Selector Control Dial to return to the Main Menu.
Setting and Using WAKE SET — continued
IME: 06:00AM/08:00AM
URATION: 5 MINUTES
IGHT: NONE
OLUME: 25
WAKE PLAY MODE
V CONTINUOUS
REPEAT
Using SNOOZE
After the Wake Cycle begins, you can “snooze” for another fi ve minutes by
pressing the Selector Control Dial. The alarm cycle stops and will begin again in
fi ve minutes.
